- A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated.
- Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
Besides, How wide should a bar counter be? Home bar tops are usually between 12- to 16-inches wide. Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar. Drink rails are typically 3/4-inch deep by 4-inches wide.
How deep should counter be for bar stools?
Stools for raised 42-inch countertops are usually between 28 and 30 inches tall, giving a comfortable 12 to 14 inches of knee room. The recommended counter overhang also varies with the counter height, with experts suggesting 15 to 18 inches for the lower counter and 12 inches for a raised counter.
How far does countertop hangover cabinets? Standard countertop overhang is 1 1⁄2 inches. Keep in mind that this is 1 1⁄2 inches over the front edge of the base cabinet. While some countertops may have different overhang measurements, this is the number that is seen as standard for homes. While 1 1⁄2 inches is the most common, it’s far from mandatory.
Hence, Is 12 inch overhang enough? According to Atlantic Shopping, if you want to be able to eat at your kitchen island, you’ll need at least 12 inches of overhang to make adequate knee space. It’s also important to remember than an overhang of over 12 inches requires support to make it sturdy enough to lean on and eat off of.
What depth should a breakfast bar be?
A breakfast bar should be 24 inches deep. This depth gives you an appropriate amount of space on your counter without being too big.
How deep is a breakfast bar overhang?
When it comes to a breakfast bar overhang, the standard size for this should be 18 inches to allow for enough leg room.
How deep should wet bar shelves be?
A homemade bar can be made any size, but a depth of about 24 inches is typical. This is deep enough to provide stability and adequate top surface area. If you plan to use tall barstools, design it with about a 10-inch overhang.
What is a good depth for a breakfast bar?
A breakfast bar should be 24 inches deep. This depth gives you an appropriate amount of space on your counter without being too big.
How deep is a bar overhang?
A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
How long should a bar be for 3 stools?
In order to determine how many stools will fit at your kitchen island, home experts recommend you allow 28 to 30 inches for each seating space, which means you can divide the length of your island’s counter by 30 to to figure out how many stools will comfortably fit.
How wide should a bar countertop be?
Home bar tops are usually between 12- to 16-inches wide. Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar. Drink rails are typically 3/4-inch deep by 4-inches wide.
What is the typical bar overhang?
A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
How tall should a bar cabinet be?
Bar-height countertops, also known as pub tables, should be positioned 42 inches off the ground (making the base cabinet height 401⁄2 inches off the ground). This height lets you comfortably place beverages on the bar from either a standing or a seated position.
How much space is needed behind a bar?
Allow at least 36 inches between the bar and the back bar or wall. This is a bare minimum to allow a single bartender space. If constructing a large bar, where it is possible more than one person will be behind the bar, allow more space.
How wide should a bar base be?
The main bar top surface should be at least 16” wide and can be as wide as 20” or more depending on the space available but enough space should be provided for a dinner plate, pan of pizza and some drinks.
How thick should a bar top be?
Answer: 16-20+ inches. However, it does depend to some degree on who you ask. While some will offer the 16-20 inch measurement, you may find other suggestions. For instance, Grouthouse—maker of custom wood bar tops—says “Home bar tops are usually between 12- to 16-inches wide.
What is the average overhang for a bar?
A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
How deep is a back bar?
Standard back bar depth should be 24” – 29”. Under bar stainless bar equipment is normally 30” high. This is the working surface height for the bartender.
How much room is needed behind a bar?
Allow at least 36 inches between the bar and the back bar or wall. This is a bare minimum to allow a single bartender space. If constructing a large bar, where it is possible more than one person will be behind the bar, allow more space.
