- Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar.
- Drink rails are typically 3/4-inch deep by 4-inches wide.
- The minimum bar top thickness is 1 3/4-inches utilizing a flat grain wood.
Besides, How much overhang should a bar top have? A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
How deep should bar counters be?
Bar counter depth can range from 16 to 20 inches deep, depending on your preference. This is also going to depend on the type of seating you choose and what kind of overhang is recommended so that your guests can sit comfortably at the bar with enough leg room.
Are bar height counters out of style? In short, yes. Bar height counters have had their time in the limelight, and now are generally being pushed aside in favour of level kitchen islands and breakfast bars. These are much more in line with the ever-rising open plan kitchen trend and provide many more benefits than bar height counters do.
Hence, How far can a countertop overhang without support? Solid Surface countertops can overhang 6 inches without additional support (e.g. plywood decking). 3 cm Quartz (engineered stone) can handle a 14 inch overhangs and 3 cm Granite overhangs should not exceed a 10 inch overhang without additional support.
How far should a countertop overhang?
Standard countertop overhang is 1 1⁄2 inches. Keep in mind that this is 1 1⁄2 inches over the front edge of the base cabinet. While some countertops may have different overhang measurements, this is the number that is seen as standard for homes. While 1 1⁄2 inches is the most common, it’s far from mandatory.
Do it yourself bar ideas?
Here are some easy DIY bar ideas:
- A bar cart that can be moved between rooms.
- Outdoor pallet bar.
- Make a bar out of a kitchen island kit.
- Turn shelving into a bar.
- Turn an old cabinet into a bar station.
- Change a vintage suitcase into a bar.
- Repurpose old furniture, such as a chair into a bar.
What is the standard overhang for a countertop?
A standard countertop usually has an overhang of 11⁄2 inches. Although some countertops may have a longer or shorter overhang, this number is generally the standard length for an overhang in homes. When utilizing an overhang for kitchen islands, the standard amount of overhang is typically 12 inches.
How do you make an epoxy bar top?
How do I make a budget bar?
How do I make my bar look nice?
Combine Classic Pendant Lighting and Recessed Lights A home bar looks particularly good with a cluster of three or four pendant lights centered above the bar, high enough so no one bumps their head. Choose lower wattage bulbs and soft lights to give your bar area a pub-like atmosphere. Also consider recessed lighting.
What is the average bar height?
A bar-height table generally measures in the 40- to 42-inch height range. A counter-height table runs about 34 to 36 inches tall, and standard dining-height tables range from 28 to 30 inches tall. How do I choose chairs or stools for the counter and bar-height tables?
What kind of wood do you use for epoxy countertops?
Wood – including plywood, butcherblock, and live edge.
How much epoxy do I need for a bar top?
Coverage Chart for Bar & Table Top Epoxy
| Gallons | Square Feet |
|---|---|
| 1 | 12 |
| 2 | 24 |
| 3 | 36 |
| 4 | 48 |
How do you make homemade epoxy countertops?
How thick should a wood bar top be?
The most common thickness for Wood and Butcherblock Countertops
- End Grain ButcherBlock Countertops have a minimum thickness of 2 1/2″
- Sapele Mahogany ButcherBlock used for the Newton Centre Project by This Old House® Television Show is 2 1/2 inches thick.
What is the standard overhang for a bar top?
When planning a raised bar top, the general height of the bar should be anywhere from 42 to 48 inches high, providing enough room for barstools. For a raised bar top, a countertop overhang of 12 inches is the standard to allow room for sitting.
What’s the standard overhang for a bar?
A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
How tall should a bar counter be?
A standard height for a bar counter is 42 inches. When designing a bar, it’s important to consider the space, personal preferences and even safety. In general, the standard bar height is 42 inches, but kitchen bar height does vary.
How far can granite span without support?
According to the Marble Institute of America, you can safely overhang granite that is 1 1⁄4 inches thick up to 10 inches without support. However, the cantilevered portion cannot be more than one-third the total width of the countertop.
What material is used for bar counter?
The Best Materials for Bar Countertops: Granite, Marble & More. A bar can add a fun and dynamic element to any environment for entertaining guests, while also adding visual appeal to any home or business.
How do I build a bar top at home?
What can I use for an outdoor bar top?
Best Materials for an Outdoor Bar Bar tops that are made of hard materials — both natural, like granite or quartz, and man-made, like Corian and Silestone — will more than likely be the best choices due to their ruggedness. One downside of using any kind of metal, such as stainless steel, as an outdoor bar top is heat.
Is granite good for a bar top?
When it comes to bar tops, granite is an excellent choice. The natural stone is not only beautiful but incredibly durable as well.
How wide should a bar top be?
Home bar tops are usually between 12- to 16-inches wide. Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar. Drink rails are typically 3/4-inch deep by 4-inches wide.
Do it yourself home bar?
Here are some easy DIY bar ideas:
- A bar cart that can be moved between rooms.
- Outdoor pallet bar.
- Make a bar out of a kitchen island kit.
- Turn shelving into a bar.
- Turn an old cabinet into a bar station.
- Change a vintage suitcase into a bar.
- Repurpose old furniture, such as a chair into a bar.
What is standard bar height?
A bar-height table generally measures in the 40- to 42-inch height range. A counter-height table runs about 34 to 36 inches tall, and standard dining-height tables range from 28 to 30 inches tall.
